Skip to product information
1 of 3

My Store

Miata Drop Knuckles- Front

Miata Drop Knuckles- Front

Regular price $465.00 USD
Regular price Sale price $465.00 USD
Sale Sold out
Configuration

All New Zerek Fabrication Miata Drop knuckles with Mini Cooper Hubs!

Why Did we go to mini cooper hubs? 

  • Stronger Hubs
  • Cost Efficient 
  • Easy Bolt on Service
  • larger rotor size (11") at a cheaper price! (sport Calipers needed) 

Zerek Fabrication Miata front drop knuckles give you the most amount of suspension geometry correction over any other knuckle on the market. From drift to grip, the use of a drop knuckle will lower your center of gravity and Give you a better roll center!

Zerek Fab Miata drop knuckles were Designed, off a full 3D scan of the Miata suspension. This allows us to fine tune specs and pinpoint exactly where we need to adjust geometry at a lowered ride height, while also giving roll correction and higher steering angle. Once the design was finalized, rigorous FEA (Finite Element Analysis) testing was completed at 4 times the weight of the vehicle per corner. This ensures the strength and integrity of our product's performance. We recommend the use of our rear drop knuckle in conjunction with the front to keep proper geometry consistent throughout the entire car. 

 

Additional parts will be needed to complete this kit, all drop knuckles will be sent with instructions and part numbers that will need to be ordered.

If you buy the "Full kit", you will only need to buy rotors locally. 

 

IMAGE PHOTO IS OF FULL KIT WITH ARP HARDWARE!

 

Full Kit consists of the following:

  • Drop knuckles.

  • wheel bearing/Hubs

  • Stud Conversion

  • Mating Hardware

All Drop Knuckles now come with 2 mounting holes for road race and drift settings. 

 

KEY FEATURES

Fits '90-'05 Mazda Miata

  • 1.5” of roll center correction, front and rear roll center correction should be even for a balanced roll center throughout the car
  • Built in 1.5 degrees of camber to correct camber gain
  • 0 Ackerman for even and consistent steering input (inner setting)
  • Bump steer correction**



Stainless steel extended brake line kit optional add-on

**Use of a bumpsteer kit is still recommended, as every cars setup can have different bumpsteer and a bumpsteer kit is the only way to completely eliminate bumpsteer

 

Weight comparison 

Zerek Fab Drop Knuckle    3LB 14OZ

With Hub Installed 10LB 5 OZ

 

View full details